Fostex LR16 Using the internal effects processor, Using Insert, Applying the internal effects

Models: LR16

1 92
Download 92 pages 4.16 Kb
Page 38
Image 38

Model LR16 [Mixer functions]

• Using Insert

The [INSERT] jack, as well as the AUX post send, is used for connecting to an external processor. Unlike the AUX send, you can ap- ply effects to a single channel signal.

The LR16 provides the [INSERT] jacks for mixer channels 1 through 8. Each jack is used mainly for connecting a compressor, limiter, equalizer, etc.

[INSERT] jack

By connecting an external effect processor to the [INSERT] jack, you can send the channel signal to the processor and receive the pro- cessed signal.

External effects

processor

HIGH

MID

LO

EQ

The [INSERT] jack on the LR16 is the TRS- type unbalanced phone jack. You can make bidirectional connection with the effect pro- cessor using a "Y" cable as shown below.

Send (to an effect processor)

Ring

Tip Sleeve

Return (from an effect processor)

*The sleeve is a ground for both signals.

Using the internal effects processor

The LR16 features the internal effects (reverb/ delay) processor, which allows applying ef- fects to the mixer channel signals.

The effect send signal of each channel is ad- justed by the [EFF] control after the channel fader. The effected (wet) signal is adjusted using the controls in the [EFFECT TO STE- REO], [EFFECT TO GROUP] and [EFFECT TO AUX] sections and sent to the stereo, group and AUX busses.

ERR RTN L-R

Internal

Effector EFF RTN 1-2

EFFECT

EFF RTN 3-4

EFF RTN AUX

• Applying the internal effects

The following shows how to send the effected (wet) signal from the internal effects proces- sor to the stereo L/R buss.

2

1

4

3

(1)Set the [EFFECT ON/OFF] switch to "ON" ().

(2)Select the desired effect type using the [SELECT UP/DOWN] switch.

The indicator for the selected type is illuminated. (See the next page for details about each effect type.)

(3)Adjust the effect send level of the channel signal using the [EFF] control on each mixer channel.

Note that the effect send level is affected by the channel fader.

38

Page 38
Image 38
Fostex LR16 manual Using the internal effects processor, Using Insert, Applying the internal effects