Fostex LR16 manual Copying a stereo mix file to an external medium, Press any operation key

Model LR16 [Recorder functions / Project management]

(4)Use the [MENU] dial to highlight "[EXECUTE]" and press the [ENTER] key.

<Note>: If the data of a project with the same name exists on the USB memory stick when you attempt to execute ex- porting the project data by pressing the [ENTER] key, the following popup ap- pears.

To overwrite the existing data, press the [ENTER] key. If you do not want to over- write the existing data, press the [EXIT/ NO] key to cancel exporting data.

You can export data without overwrit- ing the existing data after changing the project name.

Copying a stereo mix file to an external medium

You can copy a stereo mix file in the "2 mix" folder of the current project to an external USB memory stick. You can copy all or any desired stereo mix files.

<Note>: Connect a FAT16- or FAT32-format- ted USB memory stick to the [USB HOST] port of the main unit before executing the follow- ing procedure.

INPUT

GROUP (+4dBu)

EFF SEND (-2dBu)

AUX SEND (-2dBu)

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

R

STEREO OUT (+4dBu)

L

ST MIX OUT (-10dBV)

USB

MIDI OUT

FOOT SW

CONTROLLER

PANEL LOCK

PHANTOM

POWER

USB memory stick

The LR16 starts exporting data to the USB memory stick and the display shows the progress.

The display also shows the approximate fin- ish time and remaining size of the USB memory stick.

After completing exporting data, the follow- ing popup appears.

<Note>: If no USB memory stick is connected, or if a USB memory stick is not FAT16- or FAT32-formatted, or if no stereo mix file ex- ists, the appropriate popup as below is shown and the LR16 cannot enter the Export mode.

<When no USB memory stick is set>

<When a USB memory stick is not FAT16- or

FAT32-formatted>

<When no stereo mix file exists>

(5)Press any operation key.

The LR16 exit the MENU mode and the display returns to the Home screen.

(1)Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "Project" and press the [ENTER] key.

The display now shows the project menu.

70