Fostex LR16 manual About version upgrade, Condensation, Cleaning the exterior, About copyrights

Model LR16 [Introduction/Overview]

•You can format the internal hard disk drive via the MENU mode. For details, see “Formatting the internal hard disk drive” on page 78.

About version upgrade

•The software of the LR16 will be upgraded in the future. You can download the latest software from our website and upgrade the LR16 yourself. For details about how to upgrade the LR16 to the latest software version, see page 80.

Condensation

•When temperature and humidity change suddenly (for example, when you move the LR16 from a cold place to a warm place), moisture condensation may occur to the drive, display and panel. In such a case, leave it with the power turned off for some time until the moisture evaporates.

Cleaning the exterior

•For normal cleaning, use a soft dry cloth. For stubborn dirt, moisten a cloth in diluted detergent, wring it out firmly, and wipe the dirt off. Then polish with a dry cloth. Never use solvents such as alcohol, thinner or benzene, since these will damage the printing and finish of the exterior.

About copyrights

•It is prohibited by law to use any part of a CD recording or video images or audio data for which copyright is possessed by a third party for commercial purposes such as contents, broadcasts, sales, or distribution- any purpose other than for your personal pleasure.

About damage

•Fostex is not responsible for any “direct damage” or “indirect damage” caused by using the LR16.

About CAT-5 cable

•Use only a CAT-5 STP cable for connection between the main unit and the control unit.

<Note>: Do not connect or disconnect a CAT-5 cable while the LR16 is powered on. When you connect or disconnect a CAT-5 cable, make sure that the LR16 is powered off.

10