Fostex LR16 manual Software version upgrade, Method

Model LR16 [Recorder function / Other functions]

<Note>: If you attempt to select the same destination channels as the memory play signal, the warning message as below is shown and you cannot select the chan- nels.

• To assign the destination channels of Memory play

(3)Use the [MENU] dial to highlight "MemPlay" item and press the [ENTER] key.

The current setting ("-/-" by default) starts flashing.

Software version upgrade

When the software version of the LR16 is up- graded, you can upgrade the LR16 by your- self. The upgraded software can be down- loaded via the Fostex website (http:// www.fostexinternational.com/).

Use either of the methods below to upgrade the software.

The downloaded software file has the ".mot" extension. See the Fostex website for details about how to download the file.

<Note>: If you cannot download the file from the Fostex website, consult the Fostex ser- vice station or your nearest dealer.

(4)Use the [MENU] dial to select the destination channels and press the [ENTER] key.

You can select from channel pairs ("1/2", "3/4" and "5/6") as well as "-/-".

When "-/-" is selected, no channel is assigned.

<Note>: If you attempt to select the same destination channels as the SUB IN sig- nal, the warning message as below is shown and you cannot select the chan- nels.

(5)Press the [STOP] key to exit the MENU mode.

<Memo>: If you initialize the system memory via the "Sys default memory" menu item of the "System" menu, these items revert back to the default settings.

<Method 1>

Use the "USB" menu in the MENU mode to connect the LR16 to a personal computer and transfer the downloaded upgrade file to the internal hard disk of the LR16. For details about how to transfer a file, see page 74.

INPUT

GROUP (+4dBu)

EFF SEND (-2dBu)

AUX SEND (-2dBu)

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

R

STEREO OUT (+4dBu)

L

ST MIX OUT (-10dBV)

USB

MIDI OUT

FOOT SW

CONTROLLER

PANEL LOCK

PHANTOM

POWER

Personal computer

<Method 2>

Connect a USB memory stick to a personal computer and copy the downloaded upgrade file to the USB memory stick, then connect the USB memory stick to the [USB HOST] port of the LR16.

Note that you cannot connect a personal com- puter to the LR16 while a USB memory stick is connected to the LR16.

INPUT

GROUP (+4dBu)

EFF SEND (-2dBu)

AUX SEND (-2dBu)

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

R

STEREO OUT (+4dBu)

L

ST MIX OUT (-10dBV)

USB

MIDI OUT

FOOT SW

CONTROLLER

PANEL LOCK

PHANTOM

POWER

USB memory stick

80