Fostex LR16 manual Saving a project to an external medium

Model LR16 [Recorder functions / Project management]

(3)Use the [MENU] dial to highlight "Roll back" press the [ENTER] key.

The display now shows the list of ADL files stored in the LOG folder.

The screen example below shows TAKE001 (blank), TAKE002 (after the first recording), TAKE003 (after the first editing).

(4)Use the [MENU] dial to highlight "TAKE002" and press the [ENTER] key.

The project is rolled back and the display shows the Home screen of the pre-edited project.

<Memo>: If you bring up the screen showing the list of ADL files after rolling back the project, it looks as below. You can see TAKE002 replaces TAKE004.

<Note>: Each time you make editing, a new ADL file is created and the disk space is con- sumed. Therefore, it is recommended to de- lete unnecessary projects or format the in- ternal hard disk.

Saving a project to an external medium

You can save the current project to an exter- nal USB memory stick.

<Note>: Connect a FAT16- or FAT32-format- ted USB memory stick to the [USB HOST] port of the main unit before executing the follow- ing procedure.

INPUT

GROUP (+4dBu)

EFF SEND (-2dBu)

AUX SEND (-2dBu)

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

R

STEREO OUT (+4dBu)

L

ST MIX OUT (-10dBV)

USB

MIDI OUT

FOOT SW

CONTROLLER

PANEL LOCK

PHANTOM

POWER

USB memory stick

<Note>: If no USB memory stick is connected or a USB memory stick is not FAT16- or FAT32-formatted, the appropriate popup as below is shown and the LR16 cannot enter the Export mode.

<When no USB memory stick is set>

<When a USB memory stick is not FAT16- or

FAT32-formatted>

(1)Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "Project" and press the [ENTER] key.

The display now shows the project menu.

68