Fostex manual Usage examples of LR16, Integrating the main unit and control unit

Model LR16 [Before using the unit]

Usage examples of LR16

The control unit and main unit of the LR16 are separated. You can set these units flexibly.

<Usage example 1>

Integrating the main unit and control unit.

You can integrate the main unit and con- trol unit.

Use the supplied CAT-5 cable (approx. 50 cm length) to connect between the units. See the next page for details about how to integrate the units.

<Usage example 2>

Mounting the main unit and control unit on the rack.

As shown on the right, you can mount each unit to the rack. In this case, use a CAT-5 cable which has enough length for connecting between the units (the cable supplied with the LR16 is approxi- mately 50 cm length).

<Note>: Use only a CAT-5 STP cable for connection between the main unit and the control unit.

<Usage example 3>

Setting the main unit and control unit separately.

You can set the main unit and control unit over a 50 meter distance. In such a case, use a CAT-5 cable which has enough length for connecting between the units (the cable sup- plied with the LR16 is approximately 50 cm length).

<Note>: Use only a CAT-5 STP cable for connection between the main unit and the control unit.

14