Model LR16 [Recorder functions / Mark function]

Mark function

The recorder of the LR16 features the mark function. You can add a mark to a desired position in a song and can quickly locate to the mark position. You can edit the position or label of a mark, as well as delete a mark.

Adding a mark

You can add a mark by either of the follow- ing two methods. Up to 99 marks can be added.

1)Adding a mark on-the-fly during audio recording

2)Adding a mark via the mark list screen

Adding a mark on-the-fly

During audio recording, pressing the [ENTER] key at the desired position adds a mark there. This method can be used during audio re- cording in New Project mode and Insert mode. When you press the [ENTER] key, a popup screen as below is briefly shown. Each time a mark is added, the mark number counts up.

• Adding a mark via the mark list screen

You can add a mark while playing back a project. Using this method, you can add a mark after recording.

(1)While the recorder is stopped, press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)While "Mark point" is highlighted, press the [ENTER] key.

The display now shows the mark list screen. If no mark is set, all mark slots show "--h--m--s--f".

[ENTER] key

<Memo>: Pressing the [ENTER] key af- ter starting playback also brings up the mark list screen.

By pressing the [ENTER] key repeatedly dur- ing recording, marks are added to the project as below.

(3)Press the [PLAY] key to start playback of the project, and press the [ENTER] key at the position you want to add a mark.

The position is set to MARK01 and you are now ready to set MARK02.

By pressing the [ENTER] key repeatedly during

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recording, marks are added to the project as be-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

low.

By pressing the [ENTER] key repeatedly, you

 

 

 

 

 

 

 

 

 

 

 

 

can add marks repeatedly to the project.

 

 

 

 

 

 

 

 

 

 

 

 

After adding marks, press the [STOP] key

 

 

 

 

 

(4)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to exit the MENU mode.

61

Page 61
Image 61
Fostex LR16 manual Mark function, Adding a mark on-the-fly, Adding a mark via the mark list screen