Fostex LR16 manual Selecting a desired file, Selecting all files, Select the files to be exported

Model LR16 [Recorder functions / Project management]

(3)Use the [MENU] dial to highlight "Export ST mix" press the [ENTER] key.

After the LR16 checks the USB memory, the display shows the "export 2 mix" screen.

On this screen, stereo mix files in the

"2 mix" folder of the current project are listed up.

In the screen example above, two stereo mix files exists.

(4)Select the file(s) to be exported.

You can export any desired file(s) or all files.

<Selecting a desired file>

By using the [MENU] dial to select a desired file and pressing the [ENTER] key, you can put a checkmark to the left of the file name, while the volume of the selected file is shown on the right of "-File select-".

By repeating the operation above, you can put a checkmark to another file.

<Selecting all files>

By pressing the [ENTER] key while

"[All select]" is highlighted, a checkmark is put to every file as below.

<Memo>: To deselect a file, highlight a desired file with a checkmark and press the [ENTER] key. The checkmark is re- moved.

(5)Use the [MENU] dial to highlight "[EXECUTE]" at the bottom and press the [ENTER] key.

<Note>: If the data of a project with the same name exists on the USB memory stick when you attempt to execute ex- porting the project data by pressing the [ENTER] key, the following popup ap- pears.

To overwrite the existing data, press the [ENTER] key. If you do not want to over- write the existing data, press the [EXIT/ NO] key to cancel exporting data.

The LR16 starts exporting data to the USB memory stick and the display shows the progress. The display also shows the ap- proximate finish time and remain size of the USB memory stick.

71