Fostex LR16 manual Connecting the power cord, Turning on the power, Preparation of power supply

Model LR16 [Before using the unit]

Preparation of power supply

Connecting the power cord

Using the supplied power cord, con- nect the [AC IN] connector on the rear panel of the main unit and the AC outlet.

<Note>: Use only the supplied power cord.

[POWER] switch

AC outlet

Turning on the power

Press down the [POWER] switch on the rear panel of the main unit to turn on the power.

After a while, the LR16 normally starts up and the display on the recorder unit shows "<No project>" (indicating that nothing is recorded on the recorder's hard disk).

For details about recording, see "Mixer function" on page 33 and "Recorder function" on page 43.

To turn on or off the LR16 and peripheral devices which are connected to the LR16, follow the proper procedures described below.

Procedures of turning on the power after connecting peripheral devices

<Note>: Before turning on or off the LR16 and peripheral devices which are connected to the LR16, make sure that the channel faders and monitor gain control of the LR16, as well as the volume control of an monitor amplifier (or powered monitor speaker), are set to minimum. Otherwise, a loud sound may be produced suddenly that may damage the speaker or your hearing.

(1)Turn on the devices connected to the [INPUT] connectors to the LR16.

(2)Turn on the LR16.

(3)Turn on the monitor amplifier (or powered monitor speaker).

Procedures of turning off the power after connecting peripheral devices

(1)Turn off the monitor amplifier (or powered monitor speaker).

(2)Turn off the LR16.

(3)Turn off the devices connected to the [INPUT] connectors to the LR16.

17