TANDBERG D1389801 user manual Unpacking, Installation site preparations, Rack Mounting optional

2.1 Unpacking

To avoid damage to the unit during transportation, the Content Server is delivered in a special shipping box, which should contain the following components:

ƒUser Manual and other documentation on CD.

ƒRack-ears, screws and screwdriver.

ƒCables:

oPower cable o Ethernet cable

ƒTANDBERG Content Server

Installation site preparations

ƒMake sure that the Content Server is accessible and that all cables can be easily connected.

ƒFor ventilation: Leave a space of at least 10cm (4 inches) behind the Content Server’s rear panel and 10cm (4 inches) in front of the front panel.

ƒThe room in which you install the Content Server should have an ambient temperature between 0ºC and 35ºC (32ºF and 95ºF) and between 10% and 90% non-condensing relative humidity.

ƒDo not place heavy objects directly on top of the Content Server.

ƒDo not place hot objects directly on top, or directly beneath the Content Server.

ƒUse a grounded AC power outlet for the Content Server.

Rack Mounting (optional)

The Content Server comes with rubber feet for standalone installation and brackets for mounting in standard 19” racks.

Before starting the rack mounting please make sure the TANDBERG Content Server is placed securely on a hard flat surface.

1.Disconnect the AC power cable.

2.Make sure that the mounting space is prepared according to the ‘Installation site preparations’ above.

3.Attach the brackets to the Content Server on both sides of the unit.

3