Tascam MP-VT1 Introduction, Supplied accessories, Manual conventions, Beware of condensation

1 – Introduction

Thank you very much for purchasing the TASCAM MP-VT1 MP3 Music & Voice Trainer. Please read this Owner’s Manual carefully before using the unit in order to maximize your use of all its features. We hope that you will enjoy using this trainer for many years to come.

The MP-VT1 is a flash memory (1 GB) music player that has been optimized for voice and instrument practice. If you are trying to learn a part that is too difficult to catch at ordinary playback speed, you can use this trainer to slow the playback to a speed that makes learning the notes easier.

Furthermore, the dedicated mic input allows you to use the unit’s built-in effects as you sing or play an instru- ment along with the music. Using a computer, you can also transfer music as MP3s easily from audio CDs and other sources to the MP-VT1.

Supplied accessories

In addition to this manual, the following accessories are supplied.

• Quick Start Guide	1
• Mini-B USB cable	1
• Warranty card	1

Please contact the store where you purchased this unit if any of these accessories are missing.

NOTE

We recommend that you keep the original box and packing materials for transportation of this unit.

Manual conventions

In this manual, we use the following conventions:

•Controls and keys on the MP-VT1 are written like this: MENU.

•Messages shown on the display are written like this:

Are you sure?.

•If a fixed onscreen indicator (i.e. one which cannot change) is shown, it is written like this: VSA.

•We use the term “key” to describe the push-button controls on the MP-VT1.

Precautions for placement and use

The MP-VT1 may be used in most areas, but to maintain top performance, and prolong operating life, observe the following notes, precautions and environmental condi- tions:

•Avoid exposing it to extremes of temperature and humidity and avoid mechanical shocks and vibration.

•Keep the unit away from strong magnetic fields (TV sets, computer monitors, large electric motors, etc.).

•The nominal temperature should be between 0°C and 40°C (32°F and 104°F).

•Relative humidity should be 30 to 80 percent.

•As the unit may become hot during operation, always leave sufficient space above the unit for ventilation. Do not install this unit in a confined space such as a bookcase, and do not put anything on top of the unit.

•Avoid installing this unit on top of any heat-generat- ing electrical device such as a power amplifier.

•Make sure that the unit is mounted in a level position for correct operation.

•The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

Beware of condensation

If the unit is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, let the player sit for one or two hours at the new room temperature before using.

TASCAM MP-VT1