Taylor h-71 h-84 - page 29

25
ModelsH71 & H84 OperatingProcedures
Note: The Model H84 has three draw handles. Slide
thefork of thedraw handle in the slot of the dr awvalve,
starting from right to left. Slide the pivot pin t hrough
each draw handle as you insert them into the draw
valves.
Step 7
Install the front drip tray and the splash shield under
the door spout(s).
Figure 12
Step 8
Slide the rear drip pan into the hole in the side panel.
Figure 13
Step 9
Slidet he three o-rings into the grooves of the inner air
tube.
Figure 14
Slide the two o-rings into the grooves of the outer air
tube.
Figure 15
Slide the small o-ring into the groove of the air orifice.
12077
Figure 16