2Models H71 & H84Tothe Op erator
050816
Section 2 To the Operator
The freezer you have purchased has been carefully
engineeredand manufact ured to give you dependable
operation. The TaylorModels H71 and H84, freezers,
when properly operated and cared for, will produce a
consistent quality product. Like all mechanical
products, this machine will require cleaning and
maintenance. A minimum amount of care and
attention is necessary if the operating procedures
outlined in this manual are followed closely.
This Operator’s Manual should be read before
operating or performing any maintenance on your
equipment.
Your Taylorfreezer will NOT event ually compensate
and correct for any errors during the set-up or filling
operations. Thus, the initial assembly and priming
procedures are of extreme importance. It is strongly
recommended that all personnel responsible for the
equipment’s operation review these procedures in
orderto be properly tr ained and to make sure that there
is no confusion.
In the event that you should require technical
assistance, please contact your local authorized
TaylorDistribut or.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliantwith t he EU Directive as well as other similar
legislation in effect after August 13, 2005. Therefore,
it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
Theuser i sres ponsible for returning the product to the
appropriatecollection f acility,as spec ified by your local
code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.

Compressor Warranty Disclaimer

The refrigeration compressor(s) on this machine ar e
warranted for the term indicated on the warranty card
accompanying this machine. However, due to the
Montreal Protocol and the U.S. Clean Air Act
Amendments of 1990, many new refrigerants are
being tested and developed, thus seeking their way
into the service industry. Some of these new
refrigerants are being advertised as drop-in
replacements for numerous applications. It should be
noted that, in the event of ordinary service to this
machine’srefrigeration system, only the refrigerant
specifiedon the affixeddata label should be used.
Theunauthorized use of alternaterefrigerants will void
your compressor warranty. It will be the owner’s
responsibilityto mak e this fact known to any technician
he employs.
Itshould also be not ed that Taylordoes not warrant the
refrigerant used in its equipment. For example, if the
refrigerant is lost during the course of ordinary service
to this machine, Taylor has no obligation to either
supply or provide its replacement either at billable or
unbillable terms. Taylor does have the obligation to
recommend a suitable replacement if the original
refrigerantis banned,obsoleted, or no longer available
during the five year warranty of the compressor.
The Taylor Company will continue to monitor the
industry and test new alternates as they are being
developed.Should a new alternateprove, throughour
testing, that it would be accepted as a drop-in
replacement, then the above disclaimer would
become null and void. Tofind out t he current status of
an alternate refrigerant as it relates to your
compressor warranty, call the local Taylor Distributor
or the Taylor Factory. Be prepared to provide the
Model/Serial Number of the unit in question.