Teac AG-10DAV owner manual Stereo

60

Surround Mode 2

CWhen the source is PCM (2-channel stereo) and IN-AUTO or IN-PCM is selected, or when analog stereo signals are input, you can select one of the following surround modes:

DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC II MUSIC, DOLBY PRO LOGIC, DOLBY VIRTUAL, DTS NEO:6 CINEMA, DTS NEO:6 MUSIC, THEATER, HALL, MATRIX

<When the DSP button is pressed once, the current surround mode is displayed. Press the DSP button repeatedly to select any other surround mode.

<When you press the DSP button, the sound is cut off for a moment.

<When the surround back speaker is set to "None", you cannot select DOLBY DIGITAL EX.

<DOLBY DIGITAL or DOLBY DIGITAL EX can be selected only during playback of a DVD disc recorded in DOLBY DIGITAL format.

<The DSP indicator lights when THEATER, HALL, MATRIX or DOLBY VIRTUAL is selected.

(DSP: Digital Signal Processor)

STEREO

Press the STEREO button to select the stereo mode. "STEREO" is scrolled, and sound is output from front speakers (and the sub-woofer if connected).

To cancel the stereo mode, select any other surround mode by pressing the DSP button.

<If you select the stereo mode while the digital signal of DOLBY DIGITAL or DTS are being input, the multi-channel sound is downmixed to 2-channel.

<If the SPEAKER button is set to off while the digital signal of DOLBY DIGITAL or DTS are being input, the multi-channel sound is downmixed to 2-channel automatically. And when the SPEAKER button is set to on, it will return to the previous surround mode.

ENGLISH