Teac AG-10DAV owner manual OSD On-Screen Display, Speaker Setup, Press the OSD button

OSD

5bgt ENTER

1

MAIN MENU

SPEAKER SETUP

FUNCTION SELECT

SURROUND MODE

CH LEVEL TRIM

AUTO OSD : ON

up/down:MOVE

OSD:END ENTER:SEL.

OSD (On-Screen Display) 1

If a TV is connected to this unit, you can use the OSD (on- screen display) to set up the unit.

Make sure your TV is connected to the receiver and turned on.

<Any on-screen display shown on the TV will not be recorded onto VIDEO 1.

1Press the OSD button.

The main menu appears on the TV screen.

<If a normal TV (4:3) is connected and you press the OSD button during playback of DVD, the screen might be distorted for a short while. It is not a malfunction.

<Use the OSD button to display or exit the Setup menu.

<Buttons which can be used in the menu are shown at the bottom of the screen.

2

3

4

5

A

SPEAKER SETUP 1/2

SUBWOOFER - YES

FRONT - LARGE

CENTER - LARGE

SURR - LARGE

SURR B - LARGE

up/down:MOVE :CHANGE OSD:BACK ENTER:decision

SPEAKER SETUP 2/2

FRONT DISTANCE : 3.0m

CENTER DISTANCE : 3.0m

SURROUND DISTANCE: 3.0m

V.S.ANGLE : NARROW

up/down:MOVE :CHANGE OSD:BACK ENTER:decision

Example:
up/down	: Press the Up or Down button to move the cursor.
	: Press the Left or Right button to change the
	setting.
OSD	: Press the OSD button to end and exit the main
	menu.
ENTER	: Press the ENTER button to select the setting.
1/2 PAGE	: To advance to the next page, press the Up or
	Down button repeatedly.

2Select a menu using the up/down buttons (5/b).

3Press the ENTER button.

The selected menu appears on the screen.

4Change the setting using the up/down/left/right buttons (5bgt) and the ENTER button. Press the OSD button to go back to the main menu (or the previous page).

See page 84~86 for details.

Repeat steps 2 to 4 to select and set other items.

5When all the settings have been finished, press the OSD button to exit the main menu.

<Depending on your selections for the input source, input signal, decoding mode, surround mode, speaker settings, etc., the conditions of each menu may differ.

ASpeaker Setup

Speaker size setting (1/2 page)

Select the speaker you want to change using the up/down buttons, and press the ENTER buttons to change the setting.

Distance, Virtual Surround Angle (2/2 page)

Select an item you want to change using the up/down buttons, and press the left/right buttons to change the setting.

Press the OSD button to go back to the main menu.

84

ENGLISH