Parallel Recording
A single program source can be recorded onto the two cassette tapes simultaneously.
1.Follow the steps 1 to 6 described in "Recording with TAPE I and TAPE Il" except that in step 3, load cassette tapes into both TAPE I and TAPE Il. (See page 10)
2. Press the PARALLEL REC button.
Notes:
…Recording will start in the direction indicated by the direction indicator; therefore, set the direction beforehand.
…During recording, only following buttons are operational:
TAPE I : STOP button
TAPE Il : STOP, REC MUTE and PAUSE buttons
…To stop recording, press the STOP button. Both TAPE I and TAPE Il will stop.
Continuous Recording (TAPE I to TAPE Il)
1.Load two recordable cassette tapes into TAPE I and ll.
2.Set the NR SYSTEM and REC LEVEL as required.
3.Set the REV MODE switch to the ä
position. |
|
| |
4. Press the RECORD button, then | ï | ||
PAUSE (or play) button of TAPE I to | |||
Ë | |||
start recording. |
| ||
| ä | ||
After recording with | TAPE I is |
| |
completed, TAPE ll starts recording automatically in the forward direction.
5.To clear the continuous recording mode, press the STOP button.
Notes:
…In continuous recording, since recording with TAPE II always begins in the forward direction, make sure the cassette tape loaded in TAPE Il can be recorded on both sides.
…If the tape running direction is set to reverse side of TAPE l, recording will be done on only the reverse side of the tape loaded in TAPE l.
…Continuous recording from TAPE II to TAPE I is impossible.
MIC/LINE Mixing Recording (TAPE I and TAPE Il)
Using this unit, you can mix and record the MIC inputs and LINE IN inputs.
1.Plug microphones equipped with a standard phone plug into the MIC jack on the front panel of this unit.
2.Use headphones to monitor the inputs.
This prevents acoustic feedback, 'howling', that might occur if you listen to the sound from the speakers.
3.Press the RECORD button.
The deck enters the
4.Balance the relative levels of MIC inputs and LINE IN inputs with MIC LEVEL and REC LEVEL knobs.
Be sure to keep the total input level within the limitations indicated by the peak level meters.
5.Press the PAUSE button to start recording.
ENGLISH
MIC/LINE Mixing Recording
LINE
MIC
11
