CS580 EN 6/10/04 2:25 PM Page 31
Radio
Selecting Tuner Band
1.Press SOURCE repeatedly to enter Tuner mode.
2.Press CD INFO / BAND to select between MW, LW or FM Radio band.
Tips:
Your audio system has 32 preset stations.
Tuning to a Station
Press SKIP BACKWARD 
or SKIP FORWARD
to select frequency.
Using Presets
The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.
•Press TUNE/PRESET to toggle TUNE and PRESET mode.
•Press SKIP BACKWARD 
or SKIP FORWARD 
to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (FMPR:01 is FM preset 1)
Auto Preset Programming | EN |
Press and hold the CD INFO / BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.
Manually Setting Presets
1.Press the TUNE/PRESET button to enter TUNE mode.
2.Press SKIP BACKWARD 
or SKIP FORWARD 
to access the desired frequency.
3.Press the PROG/SET button once.
4.The most recently accessed program location will be displayed with the preset location flashing.
PR 01 FM
5.If a different program location is preferred, press SKIP BACKWARD 
or SKIP FORWARD 
to move to the desired preset number
6.Press PROG/SET to store the selected frequency at that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and stereo mode. (Remote Only) “ST” is displayed in stereo mode.
26
