CS580 EN 6/10/04 2:25 PM Page 33
Tape Player
Selecting Tape Player
Press SOURCE repeatedly to select tape mode.
Playing a Tape
1.In tape mode, press on the cassette door to open it.
2.Insert a tape into the door and push the door closed.
3.Press SKIP BACKWARD 
/ SKIP FORWARD 
to position the tape to the desired starting position.
4.Press PLAY 
to begin playback.
5.Press PAUSE 
to pause playback.
Tape Counter
You can keep track of tape position with the tape counter. Press PROG/SET to reset.
Recording
From Tuner
1.Insert a tape into deck.
2.Press SOURCE repeatedly to select Tuner mode .
3.Press BAND to access the desired radio band.
4.Press SKIP BACKWARD 
or SKIP FORWARD 
to tune to the station to be recorded.
5.Press RECORD to begin recording.
6.press STOP 
to end recording.
From CD | EN |
1.Insert a tape into deck .
2.Press SOURCE repeatedly on the main unit to select CD then press DISC SKIP on the remote control or DISC1 / DISC2 / DISC 3 / DISC 4 / DISC 5 on the main unit to select the disc to be recorded.
3.Press SKIP BACKWARD 
or SKIP FORWARD 
to select the track to be recorded.
or
Press PROG/SET to enter program mode.
4.Press RECORD to begin recording.
5.press STOP 
to end recording.
From AUX
1.Insert a tape into tape deck.
2.Check that the auxiliary device has been connected correctly to the AUX connector on the front of the system.
3.Press SOURCE repeatedly to select AUX mode.
4.Start playback on the auxiliary device.
5.Press RECORD to begin recording.
6.Press STOP 
to end recording.
From USB
1.Insert a tape into deck.
2.Press SOURCE repeatedly to select USB mode.
3.Press SKIP BACKWARD 
or SKIP FORWARD 
to select the track to be recorded.
You can also use MusicMatch Jukebox to select the desired track.
4.Press RECORD to begin recording.
5.press STOP 
to end recording.
28
