Technicolor - Thomson DTH8060 Placing the remote control in service, Inserting the batteries

2_DTH8060_en.qxd 17/08/05 12:21 Page 5

Connections and initial set up

Placing the remote control in service

Inserting the batteries

123

EN

Using the remote control unit correctly

When you use remote control, point the unit at the appliance you want to control (DVD recorder,TV set or satellite receiver). Ensure that there is no obstacle between the remote control unit and the appliance, otherwise the infrared signal carrying the remote control commands will be blocked.To control your DVD recorder, ensure that the remote control unit is in DVD mode by pressing once on the DVD key before using any other keys.

Placing the DVD recorder in service

Switch on your DVD recorder and your TV set

1.Turn on your TV set.

2. Set your DVD recorder remote control unit in DVD mode by pressing once on the DVD key.

3.Switch on your DVD recorder by pressing the

ON/STANDBY button on the front panel of the player.

4.The first time you turn on your DVD recorder, it will ask you to select a preferred language for the various displays via the menu which appears on your TV screen. If this menu is not displayed, on your TV screen select the AV socket to which you connected your DVD recorder.

Note:The player menus as well as the dialogues and subtitles of the DVDs will always be presented in the language you’ve chosen if it is available on the discs played.

5.Choose a language using the , ▼ keys on the remote

control then confirm by pressing OK.

Note: the keys ▲ ▼.

Continue on the next page …

5