Technicolor - Thomson DTH8060 manual Other problems

2_DTH8060_en.qxd 17/08/05 12:22 Page 73

Further information

You can’t access the selected menu, even when you press OK

•If the name of the menu appears on a transparent background, it means that the corresponding menu or function is not available.The Disc, Video, Music, Pictures and Card menus are contextual menus: they depend on operations performed beforehand such as:

•Disc is only accessible if there is a disc in the disc tray of your DVD recorder.

•Titles is only accessible once you have recorded a TV program or video sequence (from an external device).

• Play list is only accessible with a CD. E N

•USB Device is only accessible once you have connected a card reader to the front USB socket and inserted a card in it.

Your DVD recorder menu disappears

•As with computers, your DVD recorder has a screen saver which replaces the fixed menu by a mobile THOMSON logo. Press on a navigation key to bring back the fixed menu.

You can’t switch channels

•During the recording of a TV program (or video sequence from a connected device), switching channels is impossible.To change channels, you have to stop the recording completely (page 28).

In quiet moments, you hear a slight hum coming from your DVD recorder

•Your DVD recorder is equipped with a fan. It releases heat in order to ensure proper cooling. It switches on as soon as your DVD recorder is turned on and produces a slight hum.

The TV guide (NAVICLICK) is not displayed

•Downloading may be disabled. Make sure that Off is not ticked (page 66).

•Does the channel broadcast a TV guide ? Check in the list on page 67.

Other problems

Reconfiguring your player’s initial set-up

•Open the disc tray and make sure there is no disc in it. Close the disc tray. Hold down the STOP key of your DVD recorder, then press the ON/STANDBY key by holding it down for 3 seconds, until INIT is displayed on the screen of your DVD recorder.When MENU reappears on your display, turn off and then turn on your DVD recorder using the ON/STANDBY button on the front.The menu displayed on-screen is the menu which enables you to choose your DVD recorder’s display language. It confirms that all settings made since initial installation have been deleted.The DVD recorder has been reconfigured as it was when purchased (factory settings). Refer to page 5 of this manual to restart the installation of your DVD recorder.

If you forget your password

•Open the player’s disc tray and ensure that there is no disc on it. Close the tray.The player menu is now displayed on the TV screen. Now press the STOP key on your player and hold the STOP key on the remote control unit down for 3 seconds.The password that you chose for parental control is cancelled.To reallocate a code see page 62.

73