2_DTH8060_en.qxd 17/08/05 12:21 Page 7

Connections and initial set up

Sorting the channels

11.A window for classifying the channels appears with the images of the selected channel.

The automatic channel search has assigned numbers to the channels is a predefined order.These numbers may not be the numbers you would have chosen. Should this be the case, you can change these numbers by following the instructions at the bottom of the screen. For easy channel identification, we suggest you have a TV magazine at hand.

Note: Channel sorting instructions:

 

 

Move: press OK (then the

/ / /

keys until you reach

E N

the desired position (Pr no. on the left of the list then OK:

 

swapping of the 2 channels).

Delete: CLEAR key.

Rename: INFO keys, then / to search for a name on the list. Validate by pressing OK.

Decoder adjustment: AV key (indicates that the images of the selected channel will be decrypted by a decoder, of the CANAL+ type, connected to connector AV2. The symbol of a decoder displayed alongside the name of the channel confirms the adjustment).

12.When all channels have been sorted to your liking, press the STOP key.

13.Your DVD recorder has an automatic time (and date) setting function. In general, no setting is required on your part. If the time and date information are correct, press OK. A message appears. It indicates that the installation of the channels are now complete. Press OK.The main menu of your DVD recorder appears.

Clock setting

AutoClock: If the time and date are incorrect, adjust the clock as described below, check that automatic time updating is activated.The time setting of the DVD recorder is important for the correct functioning of your programmed recordings.

1.Select Year. Enter 4 digits for the year (2, 0, 0, 5 for 2005).

2.Then enter the 4 digits of the date (press 1, 5, 0, 5 for 15th May).

3.Enter the 4 digits of the time

(press 1, 5, 5, 9 for 15:59 (03:59 PM).

4.Then press twice on OK. The Main Menu will appear again. Channel set-up is complete.

Note:You can now use your DVD recorder and take advantage of its numerous functions. If you want to connect a satellite receiver to your DVD recorder, refer to page 14 for the recommended connection.You can also complete your installation through the settings available in the System Options menu (refer to pages 64-65). These adjustments depend on the other devices that you are likely to connect to your DVD recorder.

If you want to redo the automatic channel set-up, you will have to select Interactive setup in the Installation menu (in the Setup menu).

7

Page 7
Image 7
Technicolor - Thomson DTH8060 manual Sorting the channels, Clock setting