Technicolor - Thomson DTH8060 manual Standby mode, AV link, AV2 Input

2_DTH8060_en.qxd 17/08/05 12:22 Page 65

Menus

Standby mode

Your DVD recorder has an Eco Standby to reduce its power consumption when on stand-by. Select On to enable this function.

Note: the Eco function does not allow the display of programming warning messages on the display panel. Only the record icon will flash.

AV link

Allows a television set to control your DVD recorder and download the

same channels to the same numbers during installation of channels (page 6). E N

Note: this function is positioned by default on On.

Scart connector

AV2 Input

Choose the S-Video or Video signal, depending on the device connected to the AV2 Scart socket (usually a satellite or cable receiver), select RGB, S-Videoor CVBS. If you do not know the type of signal supplied by the connected device, try each of the settings to obtain the best result.

Note: format of image signals:

RGB: English signal colour code (Red – Green – Blue). This is best quality.

S-Video:S-VHS (Y/C), signals with separate colour components and brightness. This is average quality.

CVBS: composite video signals. This is poor quality.

65