Technicolor - Thomson DTH8060 manual System Options, DivX, Digital output audio, QSound/Qxpander

2_DTH8060_en.qxd 17/08/05 12:22 Page 64

Menus

System Options

The System Options menu in the Setup menu offers you settings to configure certain useful functions and optimise the performances of your DVD recorder to match those of the devices connected to it.

1.From the main menu select the Setup line with the keys, then confirm with OK.

2.Select Options system with the keys, then confirm with OK.

3.Select a function with the keys, confirm with OK, adjust and confirm with the keys and OK.

Note: the explanation of the various functions of this menu are detailed below. The associated illustrations show the corresponding adjustments or functions.

Audio output

connector

DivX

Selecting Divx displays the authorisation number.

Digital output (audio)

Depending on the amplifier or television (with or without integrated decoder) connected to your DVD recorder, you will need to set the DIGITAL AUDIO OUT sockets (coaxial or optical) so that they deliver the Dolby Digital, DTS or MPEG digital signals supported by the other device. Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or DTS decoder (or both, depending on devices). MPEG must be ticked to play a DVD disc on which the sound was recorded using MPEG standard.

	QSound/Qxpander
	This function provides you with virtual reproduction of the multichannel
	sound of a Dolby or DTS film onto the two channels of your TV or stereo
Your television set
	amplifier.The sound effects of a 5.1 system are then simulated.
	Note: The name and logo are registered trademarks of Qsounds Labs Inc.
	Laboratories. The TruSuround® technology is used under license from SRS
	Labs Inc. laboratories.

64