Technicolor - Thomson DTH8060 manual Connections and initial set up, Basic connections

2_DTH8060_en.qxd 17/08/05 12:21 Page 4

Connections and initial set up

Basic connections

Your DVD recorder has many connection possibilities to allow it to fit into a setup comprising several devices.We recommend that you follow the connection setup on this page, and then carry out the adjustments shown on the following pages.You will first need to set up the channels as explained in the following pages before the final interconnection of the devices, described on pages 14 to 18.

		1
	TV
United Kingdom	Scart cable	Coaxial Cable
Ireland
Europe	3	2

220 - 240 V

50 - 60 Hz 4

DVD recorder

1.Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN socket of your DVD recorder.

2.Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the DVD recorder to the g antenna socket of your TV set.

3.Using a Peritel cable (Scart) [not supplied] connect connector AV1 (TV) of the DVD player to the Peritel (Scart) connector on the television set (labelled AV 1, EXT 1, AUX 1 depending on the brand).

4.Use the mains cable to connect your DVD recorder to a mains socket, by first connecting the cable to the back of the DVD recorder.

Note: connection to a satellite or cable receiver is detailled on page 14.

For UK, please see safety information regarding the mains plug at the end of this user manual, in the cover page.

4