ping Command
E-DOC-CTC-20071119-0014 v1.0 547
ping Command
Send ICMP ECHO_REQUEST packets.
SYNTAX:
ping proto = <{ip|atm}>
addr = <ip-address>
dest = <{atm_pvc_8_35}>
[count = <number{0-1000000}]>
[size = <number{28-20028}]>
[interval(ms) = <number{100-1000000}]>
[DF-bit = <{disabled|enabled}]>
[srcaddr = <ip-address]>
where:
proto The interface type to be used. REQUIRED
addr The destination IP address. REQUIRED
dest The destination address for the request. REQUIRED
count The number of pings to send (0 is continuous
ping). OPTIONAL
size The size of the ping datagram(s). OPTIONAL
interval(ms) The interval in milliseconds between packets. OPTIONAL
DF-bit Set the Don't Fragment bit (or leave unset) in the
IP header of ping OPTIONAL
srcaddr The IP source address to use. OPTIONAL