ra Commands
578 E-DOC-CTC-20071119-0014 v1.0

ra config

Configure remote access parameters.
SYNTAX:
ra config [state = <{disabled|enabled}]>
[secure = <{enabled|disabled}]>
[port = <number]>
[timeout = <number]>
[mode = <{Permanent|Temporary}]>
[ipintf = <string]>
[randompassword = <{enabled|disabled}]>
[randomport = <{enabled|disabled}]>
[group = <string]>
[user = <string]>
where:
state Enable/disable RAD. OPTIONAL
secure Use secure mode (https). OPTIONAL
port The port number. OPTIONAL
timeout The timeout value. OPTIONAL
mode Mode Permanent or Temporary. OPTIONAL
ipintf The name of the xref to the IP interface. OPTIONAL
randompassword Create a random password. OPTIONAL
randomport Use a random port. OPTIONAL
group The name of the xref to the group. OPTIONAL
user The name of the xref to the user. OPTIONAL