autopvc Commands
68 E-DOC-CTC-20071119-0014 v1.0
autopvc config
Configure autopvc.
SYNTAX:
autopvc config [mode = <{pseudo|passive|active}]>
[type = <{bridge|pppoerelay|ipoa|ethoa|pppoa|
pppoe}]>
[overwrite = <{disabled|enabled}]>
[peakrate = <number{0-27786}]>
where:
mode Autopvc mode. OPTIONAL
type Type of autopvc. OPTIONAL
overwrite Enable/disable UBR peak rate overwrite. OPTIONAL
peakrate The UBR peak rate (in kilobits per second) '0' to
indicate linerate. OPTIONAL