Problems and possible causes | Solutions |
The bowl does not drain
The oil is still too hot.
The Oil box control button is not on the Automatic Oil Filtration position.
The filter grid is blocked or clogged.
The shortening has solidified.
•Wait for the temperature to go down (approximately 3 hours).
•Turn the Oil box control button on the Automatic Oil Filtration position.
•Empty the oil into a container and clean the filter grid with soap and water and a non- metallic brush. Press on the red button under the fryer to let out water and crumbs.
•Allow the fryer to heat (4 to 5 minutes).
Oil leaks
The max (3.5 l) fill mark for the bowl has been exceeded. There is some oil left in the container or it is full.
•Do not exceed the oil level
(3.5 l). Clean the fryer before any use.
•Turn the Oil box control button on the Oil box position, pull out the container and drain it.
Emits unpleasant smells
The oil has deteriorated. | • Use new oil. |
The oil is unsuitable. | • Use a good quality blended |
| vegetable oil. |
Noise during frying | |
If you hear slight popping sounds | • Change the oil. |
when using your appliance, it |
|
means that there is too much |
|
water in the frying oil. |
|
The danger comes from water |
|
being found in the oil box inside |
|
the removable bowl (as a result |
|
of the filtering process) |
|
21