Tefal Safety, To store your NutriCook, Lid closure safety, Opening safety, Excess pressure safety features

To store your NutriCook

• Turn the lid over and place it on the NutriCook body.

Safety

• Your NutriCook is provided with a number of safety mechanisms.

Lid closure safety

•The jaws should be in contact with the lid edge. If this is not the case, then steam will leak from around. The pressure indicator and NutriCook will never come up to pressure.

Opening safety

•While NutriCook is under pressure, the open/close handle cannot be activated as the mechanism is locked down by the pressure indicator.

•In this case, never attempt to force the NutriCook open, but move the selector to to the pressure indicator drops (D) back down before opening your NutriCook.

Excess pressure safety features

•NutriCook has two excess pressure safety features:

•First feature: the safety valve (M) releases pressure and the steam will escape under the control module. Fig. 19.

•Second feature: the seal (H) lets steam escape between the lid and the base. Fig. 20.

•If one of the two excess pressure safety systems is triggered:

-Turn off the heat.

-Do not move the cooker or turn the programme selector (F) to the steam release position.

-Allow the NutriCook to cool down completely by standing at room temperature.

-Open it up.

-Check and clean the operating valve (L), the steam release oultet (A), the safety valve (M) and the seal (H).

14