ProblemsRecommendations
If steam escapes from That the seal is not caught between the body and around the lid together the lid.
with a piercing noise, check :
If you cannot open the Check that the selector is set to . | |
lid: | Check that the pressure indicator is down. |
| |
| If not: release pressure. |
| Never tamper with this pressure indicator. |
If food is not cooked or The cooking time is correct.
has burnt, check: The heat level was neither too low nor too high. That the cooking program selector was in the right position.
The amount of liquid was sufficient for the cooking time.
If food has burnt in the Fill the pan with water and leave the NutriCook to
NutriCook:soak for a while before washing. Never use bleach or chlorine products.
If one of the safety | Turn off the heat. |
systems is triggered: | Leave the NutriCook to cool down without moving |
| it or turning the programme selector (F) to the |
| steam release positon. |
| Wait for the pressure indicator to drop down and |
| open the NutriCook. |
| Check and clean the operating valve, the steam |
| release outlet, the safety valve and the seal. |
| If the fault persists, have your NutriCook inspected |
| by a TEFAL Approved Service Centre. |
|
|
If the decompression | Have your NutriCook® inspected by a TEFAL |
valve (O) is | Approved Service Centre. |
disassembled : |
|
Environment protection first !
i Your appliance contains valuable materials which can be recovered or recycled.
‹ Leave it at a local civic waste collection point
18