Never use bleach or chlorine products as these could permanently damage of the stainless steel.

Do not use steel wool.

To clean the inside of the NutriCook

Clean it with a scouring pad and washing up liquid.

If the inside of the stainless steel cooker shows iridescent reflections, or white spots left by hard water, clean with a solution of equal parts water and vinegar. Leave for 10 minutes. Rinse and dry completely.

You can wash the NutriCook pan in the dishwasher.

To clean the outside of the NutriCook

Clean it with a sponge and washing up liquid.

For tough staining on the outside of NutriCook use a special stainless steel polisher and cleanser from a hardware store.

To clean the NutriCook lid

Remove the timer.

Clean the lid with a sponge and washing up liquid.

You can wash the lid in the dishwasher after first removing the timer, the control module and the seal.

If the decorative crown (G) becomes discoloured by food (carrots, oranges…), rub it with a cloth dipped in a little cooking oil, then rinse it.

To clean the steam release valve: remove the control module and clean the lid under running water. Visually check that the operating valve outlet is not blocked by holding it up to the light. Fig 14

If you accidentally remove the base of the automatic air removal system, refit it by pressing and turning it simultaneously.

Never place the timer under running water or in the dishwasher.

Automatic air

release system base

To clean the lid seal

 

• After using the NutriCook, always

 

clean the seal (H) and its groove.

 

• Wash the seal using a sponge

 

and washing up liquid.

 

• To refit the lid seal, refer to the

 

drawing Fig. 15 and ensure that

Never wash the seal in the dishwasher.

the words "face côté couvercle" are

against the lid.

 

12