Tefal TEFAL answers your questions

TEFAL answers your questions

EN

Problems	Recommendations
If you cannot close the Check that the Open/Close handle is in the vertical
lid:	position.
	Check the way up the seal is fitted, see the
	"Cleaning and Maintenance" heading.

If the NutriCook has	Have your NutriCook inspected by a TEFAL
heated up under	Approved Service Centre.
pressure with no liquid
inside:
If the pressure	Check that:
indicator did not rise	- The cooking program selector is set to one of the
and nothing escapes	cooking programmes.
from the valve during	- Your NutriCook is properly closed.
cooking:
If the pressure	This is normal for the first few minutes.
indicator has risen but	If the problem persists, select the . programme.
still nothing escapes	Wait for the pressure indicator to drop then move
from the valve during	the Open/Close handle to the vertical position.
cooking:	Clean the operating valve and steam release
	outlet under running water and check that the
	safety valve moves: Fig. 17. See the "Cleaning
	and Maintenance" heading.
If steam escapes from	That the lid is properly closed.
around the lid, check:	The position of the lid seal is the correct way up.
	That the seal is in good condition, and if
	necessary, replace it.
	That the lid, the seal, its seat in the lid are clean.
	That the edge of the NutriCook pan is in good
	condition.

17