Tefal Using the timer EN, Fitting and removing the timer

Using the timer EN

•NutriCook is not an ordinary pressure cooker, for TEFAL has innovated how best to preserve the food's nutritional qualities and especially how to bring out the full taste of every dish prepared.

•Every cooking programme includes a soft steam phase while finishing cooking, to bring out the taste in the food. Fast and powerful when starting cooking, the steam becomes mild and moderate towards the end.

•The two cooking phases, limit the possibility of overcooking, to ensure perfect cooking with the best taste and texture, plus the optimum preservation of nutrients and vitamins.

•To make it easier to use your NutriCook, the timer is there to help and guide you through your recipes.

Fitting and removing the timer

•To fit the timer (C) Fig. 7, first insert the rear part, then clip down the front part.

•To remove the timer (C), press the tab and lift it.

Cooking always takes place in two phases:

•The duration of the first pressure phase is directly linked to the chosen recipe or the kind of ingredients to be cooked, and this is the time you need to programme on the timer using the – and + buttons.

•The second soft cooking phase is pre- programmed into the timer and follows on automatically. All you have to do is follow the guide below...

•You can switch the timer off at any time by pressing simultaneously on both buttons.

•During cooking you can change the cooking time only if the timer is positionned on the NutriCook. During the soft steam phase, you cannot modify the cooking time.

Rear part

Front part Tab

Never open your NutriCook before the end of the soft cooking phase, as you could stop the cooking process before the ingredients are fully cooked. Refer to the "End of cooking" heading.

7