Tefal Control module, Minimum filling

Control module EN

•The removeable control module is designed to make it easier to clean your NutriCook.

•Once you remove the timer, the pan and lid are dishwasher safe.

•The control module comprises all of the components needed for your NutriCook to operate. Once mounted on the lid, your NutriCook can be used normally.

To remove the control module from the lid:

• Turn the lid over.

• Unscrew the module retaining nut using a coin, while holding the module in the other hand.

• Turn the lid over and remove the control module.

To fit the control module on the lid:

• Position the crown on the lid, with the vent for the automatic air ventilation system (B) aligned over the grey valve.

• Position the module, with the handle down, on the lid.

• Turn the complete assembly over while holding the module against the lid and tighten down the retaining nut using a coin.

The crown and control module will only fit one way.

Never use NutriCook without the crown.

Minimum filling

Food placed in the steaming basket must not touch the NutriCook lid.

When cooking directly in the cooker:

•Always pour a minimum amount of liquid of at least 250 ml (two glasses) into the NutriCook. Fig 3.

For steaming:

•At least 750 ml of water must be poured in.

•Place your steaming basket filled with food into the bottom of the cooker. Fig 5.

If your NutriCook was heated without any liquid inside:

•Have your NutriCook inspected by a TEFAL Approved Service Centre.

5