Maintenance
P5205 Instruction Manual 23
Removing and Replacing the TEKPROBE Interface Collar
Toremove the TEKPROBE interface collar, firmly graspthe
compensation box body with one hand, and the TEKPROBE
interface collar withthe other hand. Firmly pull the interface collar
off.
To replace the collar, note the pin configuration on the compensation
box and their holes in the interface coll ar.The group of three pins fit
through the smaller of the two holes in the interface collar. See
Figure 8.
Align the tab to the slotand gently press the two pieces together. See
Figure 8.
Once installed, the TEKPROBE collar should rotate freely to lock
and unlock.
Tab
Slot
Figure 8: Replacing the TEKPROBE collar