Maintenance
24 P5205 Instruction Manual
Removing the Compensation Box Covers
To open the compensation box, follow these steps:
1. Press the optional release tool pins into the compensation box
cover catchesand gently lift the cover off a small distance. Refer
to Figure 9, below.
2. Hold the open edge apart, and use the tool to open t he other side
of the compensation box.
3. With both sides of the box open, gently separate the two halves of
the compensation box.
Cover
catches
Figure 9: Removing the compensation box covers
Replacing the Compensation Box Covers
To replace the covers, follow these steps:
1. Align the TEKPROBEinterface and the strain relief notches with
the tabs on the cover. Refer to Figure 10 on page 25.
2. Press the catches of the bottom cover in and lower the t op cover.
3. Slide the tab into the notch.
4. Firmly pressthe pieces together until the cover catches snap into
place.