Tektronix Module Installation

Getting Started
880E00 ElectricalSampling Modules User Manual
Toinstall a sampling module, first turn off the instrument using the front-panel
On/Standby switch. Then place the sampling module in a compartment and
slowly push it in with firm pressure.Once the sampling module is seated, turn
the hold-down screwon the sampling module to tighten the sampling module
into place. See Figure 4.
CAUTION. Toprevent damag et o the sampling module or instrument, never install
or removea sampling module when the instrument is powered on or when either
input connector is unprotected.
NOTE. When removingyour sampling module, first loosen the hold-down screw,
and then use the sampling moduleejector on the main instrument to eject the
sampling module.
Small-compartment
ejectors
Electricalsampling module
Hold-downscrew
Figure 4: Installing a sampling module
Module Installation