Specifications
50 80E00 ElectricalSampling Modules User ManualTable7: Electrical sampling modules - Signalacquisition (cont.)
Specifications Characteristics
nRandom noise, Sampling module Noise
,
displayed 80E01 ≤2.3 mVRMS
1.8 mVRMS,typical
80E02 ≤800VRMS
400VRMS,typical
nRandom noise,
displayed
80E03and 80E04 ≤1.2m VRMS
600VRMS,typical
nRandom noise,
displayed
80E06 ≤2.4 mVRMS
≤1.8 mVRMS,typical
Offset range1±1.6V
1Verticaloperating range defines the maximum range over which the offset plus peak
inputsi gnal can operate. The offset may be limited as a functionof vertical
sensitivity and dynamic range, such that no signal exceeding the maximum
operatingrange can be displayed.
2Verticalnondestruct range defines the maximum range over which offset plus peak
inputsi gnal can operatewi thoutirreversible damage to the instrument. Operation to
instrumentspecification isnot guarantied outside of the vertical operating range.
3InputSi gnal Ranges in IEEE std 1057, section 2.2.1.
4IEEE std1057, section4.8.2, Transition Duration of Step Response. The 80E01 rise
time is calculated from the 0.35 bandwidth-risetime product. The 80E06 rise time is
calculated fromthe 0.35 typical bandwidth-risetimeproduct.
5IEEE std1057, section4.6, Analog Bandwidth.
6IEEE std1057, section4.8.4, Overshoot and Precursors. Step transition occurs at the
pointof m inimum radius of the waveform curvature, after the 50% amplitude point of
the step leading edge.
7When testedusing a V-connector equipped 50-ohm, ultrafast PIN Photodetector with
greaterthan 50 GHz bandwidth, which is driven by an ultrafast, mode-locked impul se
laser(for example, theCalmar FPL-01).
8Becausethe 2.4 m m connectorof this adapter will m echanically interface with the
1.85 mm connector ofthe 80E06, i tserves as a 1.85 m m-to-2.92m m connectorfor
the80E06 modul e.
Table8: Electrical sampling module (80E04) - TDR system
Specifications Characteristics
Numberof TDR
channels
2, one per channel
TDRpol arity and
operation mode
selections
Positive polarity,negat ive polarity,and TDR off are independentl y
selectable for each channel