Operating Basics
80E00 ElectricalSampling Modules User Manual 15
WARNING.To prevent injury, power down th ei nstrument and disconnect it from
line voltage beforeperforming any cleaning.
Clean the exterior surfaces of the module with a dry, lint-free cloth or a soft-
bristle brush. Ifany dirt remains, use a damp cloth or swab dipped in a 75%
isopropyl alcohol solution. Use aswab to clean narrow spaces around controls
and connectors. Do not allow moisture inside the module. Do not use abrasive
compounds on any partof the chassis, as they may damage it.
CAUTION. Toprevent damag e, avoid the use of chemical cleaning agents that
might damage the plastics usedin this instrument. Use a 75% isopropyl alcohol
solution as a cleaner and rinsew ith deionizedwater. Use only deionized water
when cleaning the menubuttons or front-panel buttons.Before using any other
type of cleaner,consult your Tektronix ServiceCenter or representative.
Do not open the case of the module. There areno user serviceable components
and cleaningthe interior is not required.