Operating Basics
14 80E00 ElectricalSampling Modules User Manual
Figure6: VerticalSetup dialog box
Programmer InterfaceCommands
The remote-programmingcommands for all sampling modules are documented
in the online Programmer Guide.
User Adjustments
All sampling module setups, parameters,and adjustments are controlled by the
main instrument. Tosave, recall, or change any module settings, usethe
instrument menus or front-panel controls o rco nsult the online help accessed
from the main instrument.
Cleaning
The case of the module keepsdust out and should not be opened. Cleaning the
exteriorof the module is usually confined to the front panel. If you desire to
clean the case, first read the entire Installation procedure starting on page 6 for
proper handling of the module. Then removethe module from the main
instrument for cleaning.