Waste Tray

Emptying the waste tray

When the front panel displays Empty Waste Tray, follow this procedure.

See page 1 for supplies ordering information.

Caution

The printer’s interior may be hot. Do not reach into the printer while the maintenance drawer is removed.

1.Open the front cover.

2.Grasp the maintenance drawer, labeled as A, and pull it out of the printer.

Note

The maintenance drawer may be locked while the ink cools after the front panel troubleshooting routine, Eliminate Light Stripes. Make sure all covers are closed. Wait 15 minutes before trying to remove the maintenance drawer. The maintenance drawer may also be locked during the warm up cycle whenever the printer is turned on.

38

Phaser 850 Color Printer

Page 49
Image 49
Tektronix 850 manual Emptying the waste tray, Waste Tray