Product Features and Accessories
P6330 3.5 GHz Differential Probe Instruction Manual 5
Table1: P6330 features and standardaccessories (Cont.)
Feature/Accessory Description
TwinFootadapter (4 ea). U sethe TwinFoot adapter to probe two
adjacentleads on a surface-mount integrated circuit. The
TwinFootadapter connects to the probe through the square pin
adapter.Flexible fingers adapt to a range of lead spacings. See
Figure 4 on page 12.
Tektronixpart number: 016-1785-00 (package of 4)
Y-leadadapter (2 ea). The Y-lead adapter connects to the probe
through the square pinadapter. The socketed ends of the leads
maybe connected to the probe tips and accessories, or fitted onto
0.025-inchpins.
Tektronixpart number: 196-3468-00 (package of 2)
X-lead adapter (2 ea). The X-lead adapter connectsbetween
accessories fitted with 0.025 -inch pins, such as the SMT KlipChip
and MicroKlipChip adapters.
Youcan use the X-lead adapter with the adapters below to make
connectionsbetween the probe tip and your circuit under test.
Be aware of the electricaleffects of the added lead length of the
adapters, especiallyas circuit frequencies increase.
Tektronixpart number: 196-3473-XX (package of 1)
SMT KlipChip adapter (2 ea). Use this accessoryto probe the
leadson dual -in-linepackages (DIP). The 0.025-inch pins
recessedin the adapter body may be connected to the X- and
Y-leadadapters, and the 3-inch ground leads.
Tektronixpart number: 206-0364-XX (package of 1)
Colormarker bands Color marker bands (10 ea). Attach matchingpairs of the color
markerbands onto the cable at the head and compensation box
of each probe. The markerbands enable quick verification of
which probe isconnected to which instrument channel.
Tektronixpart number: 016-1315-00 (package of 10)