Adjustments
54 P6330 3.5 GHz Differential Probe Instruction Manual
6. Adjust Offset Range for a DMM reading equal to the value set in
theZeroOffset procedure (step 4 on page 50), ±3mV.Referto
Figure 24 on page 49 for the location of the offset range
adjustment.
This completes the adjustments to the probe. Replace the com pensa-
tion box cover and do a performance verification of the probe.
Replacing the Compensation Box Cover
To replace the cover, follow these steps:
1. AligntheTEKPROBEinterface and the tab notches withthetabs
on the cover. Refer to Figure 27.
2. Press the cover catches in so that the cover can be lowered.
3. Slide the tab into the notch.
4. Firmlypressthe pieces together until the cover catches snapinto
place.
Tab
Figure 27: Replacing the compensation box cover