Maintenance
56 P6330 3.5 GHz Differential Probe Instruction Manual
Removing and Replacing theTE KPROBEInterface CollarToremove theTEKPROBEinterfacecollar,firmlygraspthe
compensation box body with one hand and the TEKPROBE interface
collarwiththe otherhand. Firmlypull theinterface collaroff.
To replace the collar, first note the pin configuration on the
compensationbox andtheirholes inthe interfacecollar.The group
of three pins fit through the smaller of the two holes in the interface
collar. See Figure 29.
Alignthetab to the slot,andgently press the two pieces together.
See Figure 29.
Once installed, the TEKPROBE collar should rotate freely to lock
and unlock.
Tab
Slot
Figure 29: Replacing the TEKPROBE interface collar