Command Descriptions
2–94 TDS Family Oscilloscope Programmer Manual
CURSor:VBArs:UNITS
Sets or queries the units for the vertical bar cursors. This command is equivalent
to setting Time Units (Horiz Units in the TDS 400A) in the Cursor menu.
Cursor
CURSor:VBArs:DELTa?, CURSor:VBArs:POSITION<x>
CURSor:VBArs:UNITS { SECOnds | HERtz | LINE (with option 05)
| BASe (TDS 400A only) | INVert (TDS 400A only)}
CURSor:VBArs:UNITS?
For the TDS 510A, 500C, 600B, & 700C:
CURSor :VBArs : UNITS
?
LINE
HERtz
<Space>
SECOnds
For the TDS 400A:
CURSor :VBArs : UNITS
?
LINE
HERtz
<Space>
INVert
SECOnds
BASe
SEConds specifies seconds as the unit of measure. For the TDS 400A, this
argument is available only for backward compatibility. If a TDS 400A receives
this argument, it will convert it to BASE or INVERT depending on the selected
waveform. The TDS 400A will not output this argument in response to a query.
HERtz specifies hertz as the unit of measure. For the TDS 400A, this argument is
available only for backward compatibility. If a TDS 400A receives this argu-
Group
Related Commands
Syntax
Arguments