Command Descriptions
TDS Family Oscilloscope Programmer Manual 2–331
TRIGger:MAIn:VIDeo:FLEXformat:V2STArttime
TDS 510A, 500C, 600B, & 700C Option 05 Only
Sets or queries the time from the positive edge of the tri-sync pulse for the last
line in the selected field (t0) to the leading edge (positive) of the second vertical
sync pulse. Note: the second pulse may be a negative pulse or the negative
portion of a tri-sync pulse that is within the last line (usually located at the ½
line point). This is equivalent to selecting Setup from the video main menu
(with FlexFmt as the Standard), pressing V2 Start Time in the side menu, and
entering a value with the keypad or the general purpose knob.
Trigger
!!"!"" 
!!"!""
!"
!""
  
!  

 the v2 starttime.

returns the specified v2 starttime.
TRIGger:MAIn:VIDeo:FLEXformat:V2STOptime
TDS 510A, 500C, 600B, & 700C Option 05 Only
Sets or queries the time from t0 to the trailing edge (positive) of the second
negative vertical sync pulse. This is equivalent selecting Setup from the video
main menu (with FlexFmt as the Standard), pressing V2 Stop Time in the side
menu, and entering a value with the keypad or the general purpose knob.
Trigger
!!" " 
!!" "
Group
Syntax
Arguments
Examples
Group
Syntax