Command Descriptions
2–182 TDS Family Oscilloscope Programmer Manual
CURve, LIMit:COMPARE:MATH<x>, LIMit:TEMPLate, LIMit:TEM-
PLate:DESTination, LIMit:TEMPLate:SOUrce, WFMPre
    


 


 

 is a reference waveform.
 specifies that no template testing is to be done for the specified channel.
 
specifies REF1 as the template waveform against which to compare waveforms
acquired using CH1.

might return  , indicating that waveforms acquired
using CH2 will be compared to the template waveform stored in REF4.
LIMit:COMPARE:MATH<x>
TDS 510A, 500C, 600B, & 700C Only
Sets or queries the template against which to compare a math waveform. The
template can be a waveform saved in any of the reference locations REF1
through REF4, or none.
Limit Test
CURve,LIMit:TEMPLate, LIMit:TEMPLate:DESTination, LIMit:TEM-
PLate:SOUrce, WFMPre
    

Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax