Tektronix WFMPre:PT_Off (No Query Form)

Command Descriptions
2–350 TDS Family Oscilloscope Programmer Manual

 


 specifies that the waveform is transmitted as maximum and minimum point
pairs. Only y values are explicitly transmitted. Absolute coordinates are given
by:
XnXZEroXINcr (n–PT_Off)
Ynmax YZEro YMUlt (ynmax YOFf)
Ynmin YZEro YMUlt (ynmin YOFf)
 specifies a normal waveform where one ASCII or binary data point is
transmitted for each point in the waveform record. Only y values are explicitly
transmitted. Absolute coordinates are given by:
XnXZEroXINcr (n–PT_Off)
YnYZEro YMUlt (ynYOFf)
 
sets the waveform data point format to enveloped.
WFMPre:PT_Off (No Query Form)
Specifies the trigger point within the waveform record for the reference
waveform specified by the DATa:DESTination command.
Waveform
HORizontal:TRIGger:POsition
 
    
 = 0 to the recordlength, and is the position of the trigger point relative to
DATa:STARt.
 
specifies that the trigger point is the first point in the waveform record.
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples