Specification-TM 5006

Characte ristics

Temperature

Operating b

Non-operating

Humidity b

Altitude

Operating b

Non-operating

Vibratio n c Shock c

Bench Hand ling c

Transportation d

EMC

Electrical Disc harge

 

Table 1-2

 

ENVI

R NMENTAL CHARACTER

ISTICS 8

O

 

 

 

Description

 

 

Meets MIL-Τ-28800 Β, class 5.

0°C to +50°C

 

-55°C to +75°C

 

95% RH, 0°C to 30°C

Exceeds ΜΙ L-Τ-28800 Β, class 5 .

75% RH, to 40°C

 

45% RH, to 50 -C

95% RH, to 50°C Extende d qualification.

Exceeds MIL-Τ-288008, class 5.

4.6Km (15,000 ft .)

15 Km (50,000 ft.)

0

 

mm (0.015') peak to peak,

Exceeds MIL-Τ-28800B, class 5.

.38

 

 

5 Hz to 55 Hz, 75 minutes.

 

30 g's (11/2 sine), 11 ms duration,

Meets MIL-Τ-28800B, class 5.

3 shocks in each direction along

 

3

major axes, 18 total shocks.

Meets MIL-Τ-28800B, class 5.

12 drops from 45°, 4' or equilibrium,

whichever occurs first.

 

Qualified under National Safe Transit Association Preshipment Test Procedures 1 Α-Β-1and 1A-B-2.

Within limits of MIL-461A tests RE02; CE018; CE03; RS01 ; CS01, and CS02 .

Ι20 kV maximum charge applies to instrument case .

"System environmental specifications subject to individual plug-in specificatio ns.

"Electrical load in accordance with Section 2.2 .1 .

c With mechanical load of 19 Ibs, ±1 lb. evenly distributed. (Three two-wide plug-ins, each weighing 6 113 Ibs, t3 lbs. ±113 lb. with two rear support pins and one rear interface ECB). Requires retainer clips.

d Without mechanical load (plug-ins) .

e Increase first 3 odd power line frequency harmonic amplitudes by 10 418.

REV JUN 1984

Page 20 Page 22
Page 21
Image 21
Tektronix TM 5006 manual Emc, Envi Nmental Character Istics
Page 20 Page 22

TM 5006 specifications

The Tektronix TM 5006 is a versatile and powerful modular instrumentation platform designed primarily for test and measurement applications. As part of the TM500 series, it provides a wide range of features that cater to various engineering needs, including signal analysis, oscillation measurements, and protocol decoding. It is renowned for its flexible configuration and high-performance capabilities.

One of the standout features of the TM 5006 is its modular design. The chassis can accommodate multiple plug-in modules, allowing users to customize their instrument according to specific requirements. This modularity not only enhances the instrument's usability but also ensures a cost-effective solution, as users can upgrade or change modules as their testing needs evolve.

The TM 5006 supports an array of plug-in modules, including oscilloscopes, waveform generators, frequency counters, and signal analyzers. These modules are engineered to provide accurate and reliable measurements across various parameters, making the TM 5006 suitable for both digital and analog signal testing. Additionally, the ability to integrate different modules facilitates comprehensive testing regimes, enabling engineers to perform a wide spectrum of analyses from a single platform.

Another major technological hallmark of the TM 5006 is its high-resolution display and user-friendly interface. The instrument is equipped with a clear and intuitive interface that allows users to quickly navigate through functions and settings. This ease of use is particularly beneficial in fast-paced testing environments, where time is crucial.

The TM 5006 also boasts advanced measurement capabilities, including high-frequency performance, low-noise operation, and a broad frequency range. Its specifications make it suitable for applications in telecommunications, electronics development, and research laboratories. The built-in triggering mechanisms provide precise control over signal acquisition, while advanced analysis functions enable in-depth signal examination.

In terms of characteristics, the TM 5006 emphasizes reliability and robustness, which are vital for demanding testing environments. The instrument is designed to withstand typical lab conditions, ensuring longevity and consistent performance. Moreover, the TM 5006 complies with various industry standards, providing assurance of its quality and accuracy.

Overall, the Tektronix TM 5006 stands out as an essential tool for engineers and technicians seeking a comprehensive, versatile, and reliable testing platform. Its modular design, advanced measurement capabilities, and user-friendly interface make it an ideal choice for a diverse range of applications in the field of electronics and signal testing.
Top Page Image Contents