Section 1-TM 5006

SPECIFICATION

Instrument Description

The TM 5006 is α six-compartment power module compatible with TM 500/TM 5000-Series plug4 ns. The power module features α pulse width modulated switching do power supply. All do voltages are regulated. The right compartment is the high power compartment. The unit has fo rced air cooling.

Six indivi dual connectors, one for each compartment, provide connections to each GPIB compatible plug-i n. These connectorsfeed to α GPI Β interface board, then to α standard G PIB co nnector on the rear panel. All GPIB connections are separate from the board rear i nterface connector.

Performance Condtions

The electrical characteristics in this specification are vali d only if the TM 5006 has been adjuste d at an ambient

temperature between +20°C and +30° C. The instrument must be in α non-condensing environme nt whose limits are descri bed under the environmental part . Allow 30 minutes warm-up time for operation to specified ac- curacy; 60 minutes after exposure to or storage i n α high humi dity (condensi ng) environm ent. Any conditions that are unique to α particular characteristic are expressly stated as part of that characteristic.

The electrical and environmental performance limits, together with their related validation procedures, com- prise α complete statement of the electrical and en- vironme ntal performance of α cali brated instrument.

Items listed in the Performance Requirements column of the Electrical Characteristics are verified by completing the Performance Check in the Calibration section of this manual . Items listed in the Supplemental Information column are not verified in this manual .

TAW* 1-1

ELECTRICAL CHARACTERISTICS

Characteristics

Performance Requirements

Supplenιentι l information

 

SUPPLIES

 

+26 V do

 

 

Tolerance α

+23.7 V to +28.3 V

 

PARD "

 

< 2.5 V peak to peak

Maximum load

 

1 Α per compartment

Maximum load

 

10 mA/μA

 

 

-26 V do

 

 

Tolerance'

-23.7 V to -28.3 V

 

PARD °

 

< 2.5 V peak to peak

Maximum load

 

1 A per compartment

Maximum load dt

 

10 mA/μs

 

 

REV NOV 1981

Page 17 Page 19
Page 18
Image 18
Tektronix TM 5006 manual Electrical Characteristics, Supplies, Pard
Page 17 Page 19

TM 5006 specifications

The Tektronix TM 5006 is a versatile and powerful modular instrumentation platform designed primarily for test and measurement applications. As part of the TM500 series, it provides a wide range of features that cater to various engineering needs, including signal analysis, oscillation measurements, and protocol decoding. It is renowned for its flexible configuration and high-performance capabilities.

One of the standout features of the TM 5006 is its modular design. The chassis can accommodate multiple plug-in modules, allowing users to customize their instrument according to specific requirements. This modularity not only enhances the instrument's usability but also ensures a cost-effective solution, as users can upgrade or change modules as their testing needs evolve.

The TM 5006 supports an array of plug-in modules, including oscilloscopes, waveform generators, frequency counters, and signal analyzers. These modules are engineered to provide accurate and reliable measurements across various parameters, making the TM 5006 suitable for both digital and analog signal testing. Additionally, the ability to integrate different modules facilitates comprehensive testing regimes, enabling engineers to perform a wide spectrum of analyses from a single platform.

Another major technological hallmark of the TM 5006 is its high-resolution display and user-friendly interface. The instrument is equipped with a clear and intuitive interface that allows users to quickly navigate through functions and settings. This ease of use is particularly beneficial in fast-paced testing environments, where time is crucial.

The TM 5006 also boasts advanced measurement capabilities, including high-frequency performance, low-noise operation, and a broad frequency range. Its specifications make it suitable for applications in telecommunications, electronics development, and research laboratories. The built-in triggering mechanisms provide precise control over signal acquisition, while advanced analysis functions enable in-depth signal examination.

In terms of characteristics, the TM 5006 emphasizes reliability and robustness, which are vital for demanding testing environments. The instrument is designed to withstand typical lab conditions, ensuring longevity and consistent performance. Moreover, the TM 5006 complies with various industry standards, providing assurance of its quality and accuracy.

Overall, the Tektronix TM 5006 stands out as an essential tool for engineers and technicians seeking a comprehensive, versatile, and reliable testing platform. Its modular design, advanced measurement capabilities, and user-friendly interface make it an ideal choice for a diverse range of applications in the field of electronics and signal testing.
Top Page Image Contents